FREQUENTLY ASKED QUESTIONS

HORIZON FREQUENTLY ASKED QUESTIONS:

Check front link is tight in levelling valve. Grub screw tightens on indentation where link passes through valve lever.

Check field mode is selected.

Adjust 5mm bolt on rear 4WS switch. Screw in clockwise between one third and half a turn.

Check cruise control settings.

Fan only works when interior light door switch is in off position. Check adjustment.

Check air pressure in tank 8 Bar minimum. Check front or rear spray line selected, Is Tank Rising ball turned OFF, Is isolating tap turned on (in line with hose), Is pump turned ON, Are filter blocked, Is spraying tab set up correctly.

After filling make sure tap is reset to Spray position and allow tank to agitate for 5 minutes minimum.

Cab isn’t pressurised.

Push number 1 switch outwards, warning goes out.

To re-gen the engine, park brake on, at idle, push re-gen button, let it do its thing.

Turn on headland lift, adjust height higher, turn to field mode, turn to headland lift, it works.

Fill all fluid levels to the correct measurement.

VISION/SLC FREQUENTLY ASKED QUESTIONS:

Check front link is tight in levelling valve. Grub screw tightens on indentation where link passes through valve lever.

Adjust 5mm bolt on rear 4WS switch. Screw in clockwise between one third and half a turn.

Check 60-amp strip fuses located behind battery.

After filling make sure tap is reset to Spray position and allow tank to agitate for 5 minutes minimum.

AG LEADER FREQUENTLY ASKED QUESTIONS:

Touch the screen, bottom left hand corner, touch the circle. Always make sure you go forwards first.

Touch UT screen, touch the speed box, put “X” in speed box, type in the speed required, ok it, back to home page, on home page, touch sprayer tab, touch the M box for manual. Will now spray static.

Touch the word SETTINGS, select the nozzle box, click required nozzle & back to home page.

SIGN UP FOR SPRAYER ALERTS

Be the first to hear about our new stock!
Get our updates straight to your email inbox by signing up below.

What our customers say

“We have been dealing with SAM Sprayers for nearly 30 years and they sure know how to look after us in Scotland! The Horizon model has taken our farm to another level with precision spraying and just loves eating up our very steep hills.”

Haig HamiltonJ Haig Hamilton & Sons, Scotland

“Just finished an 18 hour stretch on the SAM Sprayer 36 mtr Horizon and I can honestly say if I didn’t need to sleep, I could carry on and do another 18 hours. Cracking machine, a joy to operate.”

Scott HarrodE.G. Harrison, Norfolk

“We are highly delighted with every aspect of our SAM Sprayer Horizon 5500, from the comfortable, ergonomic cab and the efficiencies afforded by a high capacity machine to the knowledge that, if required, we will get rapid, knowledgeable back up from the team in Norfolk. A truly fantastic all round package!”

David UllyottBapton Manor Farm Ltd, Wiltshire

“In upgrading our sprayer we found that the SAM Sprayer offered the better package given the wet spring. It has performed over expectation with a light footprint, tighter turning enabling us to travel when others have been struggling.”

Sam StephensonWandale Farm, Yorkshire